Precise, Non-contact Measurement of Large and Small Distances
Small details such as barcode lines can be measured within the
eyepiece of the 50x microscope, while the cross hair in the
microscope is used
to locate larger details
VIDEO RULERS
Exact Measurement of Materials and Stretch
BETA VIDEO
& ELECTRONIC RULERS
Data/Image Capture,
Video Micrometer,
CMYK / Spot Color
C o n t r a s t / I m a g e
Enhancement to More
Easily See, Capture
a n d R e c o r d A l l
Information
Optimized for
Extremely
Precise Non-
Contact USB
Measurement
of Films,
Plates, Dies,
and Prints
ELECTRONIC RULERS
ELECTRONIC RULERS
Ÿ
ZERO to paper
Ÿ
Measure the Solid target
Ÿ
Measure Dot Gain target of
the same color
Select next measurement mode
Note:
Status T PRESTO SPECTRO instruments are
delivered with
25%, 50% and 75%
Dot Gain
target values.
Status E instruments are set at 25%, 40%, and 80%.
These set points can be changed in the Configuration Mode.
5
AUTO Mode DENSITY
In AUTO MODE measure DENSITY, DOT GAIN and DOT AREA.
The unit will automatically ZERO to paper with a DENSITY lower
than 0.15D.
RELATIVE DENSITY MODE
with
MM
(Magic Memory).
ZERO to paper or press and hold Key A to force Zero.
Measure a specific CMYK solid.
To memorize that color press Key A. The display will
show
Target Density Updated
. Measuring another
Density Target of the same color will cause a
or
RED
GREEN
light according to the TOLERANCE setting.
Note: TOLERANCE Settings are +/- 5.0 dE & changeable
DOT AREA
- ZERO to paper, measure solid, then press
Key B and measure DOT AREA.
Press Key C to force a DENSITY measurement and
temporarily disable DOT GAIN and ZERO detection.
Y
M
C
K
DOT GAIN MEASUREMENTS
75%
75%
25%
25%
100%
100%
50%
50%
