Beta Enduro RR 250 2016, Workshop Manual, Page: 58 / 110

complete drive shaft: 1) Movable pawl; 2) Gearshift return
spring; 3) Spring guide; 4) Spring; 5) Gearshift drive shaft.
2
4
5
3
1
3
56
M
O
TO
R C
H
EC
K
S AN
D ASS
E
M
B
LY
3.6 ExTERNAL GEARSHIFT
Before reassembling the external gearshift,
check its state of use. While for the stop cam it
is enough to make sure it’s free from abnormal
wear or meshing, the gearshift drive shaft needs
more in-depth inspections.
3.6.1 Check of complete drive
shaft
With the device complete, make sure that the dis-
tance between the movable pawl and the drive
shaft is between 0.35÷0.80mm .
Should the distance be greater, replace the mov-
able pawl.
Allowed distance between shaft and pawl.
0,35÷0,50
In order to replace the movable pawl 1 , disassem-
ble the return spring of the gearshift 2 , the spring
guide 3 , the spring 4 (which must be compressed
and pulled out of its seat) and the pawl, moving
it completely towards the shaft 5 .