PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
PRODUCT SPECIFICATIONS
SOCKET DRIVE
1“
BOLT CAPACITY (8.8)
M36 - 55 mm
BOLT CAPACITY (12.9)
M30 - 46 mm
FREE SPEED
4000 rpm
MAXIMUM TORQUE
2445 Nm
AIR INLET
1/2” GAS
MAXIMUM PRESSURE
6.2 bars
MINIMUM INTERNAL HOSE SIZE (ø)
13 mm
MAXIMUM AIR CONSUMPTION
460 l/min
WEIGHT
9.5 kg
LENGTH
390 mm
HAMMER DEVICE TYPEDOUBLE HAMMER
NOISE (ISO 15744)
SOUND POWER LEVEL
LwA = 114.3 dB
SOUND PRESSURE LEVEL
LpA = 103.3 dB
VIBRATIONS (ISO 28927)
VIBRATION LEVEL
67 m/s
2
Uncertainty
K=22.1 m/s
2
KEY TO SYMBOLS
a: air inlet 1/2” GAS
b: impact wrench trigger
c: side handle
d: rotation reversal / power adjustment lever
e: oil lubrication
INSTRUCTIONS FOR INSTALLING DEVICES
Side handle installation
Assemble the auxiliary handle
(picture 3-c)
by screwing it onto the front body of the air impact wrench (manually tighten the four
screws supplied with the impact wrench by means of the hexagon driver). The auxiliary handle can only be mounted on the left side of
impact wrench body. Using the auxiliary handle results in increased ease of handling and firmness.
Air supply connection
For correct use of the pneumatic tool, always keep to a maximum pressure of 6.2 bars, as measured at the tool inlet. Feed the
pneumatic tool with clean, condensate-free air
(picture 1-a)
. Excessively high pressure or humidity in supply air results in shorter life
for the mechanical parts and may damage the tool.
Additional personal protective equipment to wear according to the values found in the environmental hygiene/risk
analysis survey if the values exceed the limits under current regulations.
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR PERFORMING
MAINTENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE OPERATING
PNEUMATIC TOOL
ALWAYS WEAR SAFETY SHOES
WEAR ANTI-VIBRATION GLOVES WHILE OPERATING PNEUMATIC TOOL FOLLOWING A
SPECIALLY CONDUCTED SURVEY OF LEVEL OF DAILY EXPOSURE OF HAND-ARM SYSTEM TO
VIBRATION
1930A.qxp:Libretto 1930A.qxd 23-08-2016 16:18 Pagina 9
