EN
°C or °F Selection Push Button
Select the temperature measurement units (
o
C.or.
o
F).using.the.
o
C/
o
F.selection.
key (
.)
The word “Max” indicates the maximum registration displayed each time in the
time elapsed from the moment when the activation/de-activation “ON/OFF” key
is pressed to the moment when it is released
MEASUREMENT OPERATION
Hold the thermometer and point it towards the surface where temperature measurement is
intended.
Pull and hold down the Trigger and proceed with the measurement operations. If the state of the
battery.is.good,.the.display.lights.up..Replace.the.battery.if.the.display.does.not.light.
Once the trigger has been released, the phrase HOLD appears on the display, to indicate that the
last.reading.has.been.memorized..In.MAINTENANCE.mode,.press.the.UP.button.to.activate.or.
de-activate the the laser. Press the DOWN button to turn on or off the retroillumination.
The instrument will automatically power down after approximately 7 seconds after the trigger is
released. (Unless the continuous measurement mode has not been activated)
1
2
3
4
Beta 1760_IR800.indd 26
16-04-2008 16:41:28
