8
Chapter 2, operation and use
2.1. Control and maintenance
It is advised that all repair or replacement operations are made by a qualified professional, but
for an optimal maintenance, it is also advised that you perform these operations before or after
each use.
2.1.1. Chain drive.
To extend the useful life of the chain, it is advised to grease it after each use by means of
specific grease for chains. For the maintenance of the chain, it is also pertinent to periodically
control its tightening. To tighten or loosen the chain:
• Loosen nut A
• Act on B register (tighten to detension or
loosen to tension).
• Proceed on the same way on the
register of the other side of the wheel
placing it on the same position. Check
that the distance on both screws of the
register is the same.
• Check that the chain is aligned with
the pinion of the engine. In order for
the chain not to go out of the crown,
it is important for it to work straight with
regard to the pinion.
• Tighten nut A.
