
4
CHECKS AND MAINTENANCE
43
EN
BLEEDING THE FRONT BRAKE
To bleed air from the front brake circuit,
proceed as follows:
U,iÛiÊÌ iÊÀÕLLiÀÊV>«Ê
1
from the valve
2
.
U"«iÊÌ
iÊÃÕ«ÊV>«°
UÃiÀÌÊiÊi`ÊvÊ>ÊÌÀ>ë>ÀiÌÊÌÕLiÊÌÊ
a container.
U*Õ«ÊÜÌ ÊÌ iÊLÀ>iÊiÛiÀÊÓÉÎÊÌiÃÊ>`Ê
keep the lever pressed.
U1ÃVÀiÜÊÌ
iÊÛ>ÛiÊ>`ÊiÌÊÌ
iÊÊ`À>°
UvÊ>ÀiÊÃÌÊÛÃLiÊÊÌ
iÊÌÕLiÊÀi«i>ÌÊ>LÛiÊ
operation until obtaining a continuous
outflow of oil within no air bubbles.
UÃiÊÌ iÊÛ>ÛiÊ>`ÊÀii>ÃiÊÌ iÊiÛiÀ°
NOTE:
During this procedure, continuously top up
the brake pump thank to replace the oil that
is out flowing.
U,iÛiÊÌ
iÊÌÕLi°
U,i«>ViÊÌ
iÊÀÕLLiÀÊV>«°
Close the oil reservoir cap.
Use the liquid indicated on page 16 in the
“Recommended lubricants and liquids” table.
WARNING:
The brake fluid is extremely corrosive. Take care not to spill it on the paintwork.
Wear appropriate protective clothing and protection gloves.
Keep coolant out of reach of children.
WARNING:
Avoid any direct contact of the liquid with skin, eyes or clothing.
If this happens:
- with the eyes, rinse immediately with plenty of water and seek medical advice.
- with skin, immediately clean contaminated areas with soap and water. Change
clothing that is contaminated with liquid.
If liquid is swallowed, contact a doctor immediately.
1
2
Summary of Contents for EVO 300cc 4T 2019
Page 1: ...300CC 4 STROKE OWNERS MANUAL 2019...
Page 63: ...62 EN...