BESV TRB1, Technical Manual

Page: 9 / 25

9
Wiring harnesses Battery pack Battery charger
B013-0 B014-0
-
Battery Pack
-
Different models
available
-
Different models
available
-
Different models
available
Take all necessary precautions to avoid damaging components, cables and coatings during assembly.
WARNING
Risk of serious injury
Always wear the personal protective equipment indicated during assembly.
-
Watch out for rotating components during assembly. Even when idle, they may move and trap limbs,
causing crush injuries.
3.2 Fitting the battery pack
The Brose e-Bike System can be combined with different battery packs. Please refer to
manufacturer’s instructions for
details on assembly.
3.2.1 Fitting the mounting rails
Please refer to the manufacturer's instructions for assembling the relevant components.
 These instructions do not provide any information about their assembly.
3.2.2 Fitting the battery pack
Please refer to the manufacturer's instructions on fitting and commissioning the battery pack.
 These instructions do not provide any information about fitting and commissioning.
3.2.3 Fitting the battery pack connector cable
CAUTION
Risk of product damage
Make sure that the connecting cables are correctly routed in the drive unit housing.
-
Do not bend or pinch connecting cables.
-
Check the shape coding before assembly.
-
Route cables according to your own specifications.
 Insert the relevant connectors into the sockets in the drive unit.
-
Route cables according to your own specifications.
-
For more information, see
“Cable assignment” on page 11.
B012-0