11
A
B
C
D
E
F
G
3.4
Cable assignment
3.4.1
General information on cable routing
CAUTION
Risk of product damage
Make sure that the connecting cables are correctly routed in the drive unit housing.
-
Do not bend or pinch the connecting cables.
-
Route cables according to your own specifications.
3.4.2
Cable assignment plan
Select cable length and route cables accor-
ding to your own specifications.
Overview
1)
Battery pack
2)
Rear light
3)
Front light
4)
Speed sensor
5)
Display and remote control unit
6)
e-Bike
Insert connectors into the sockets in the
drive unit.
Observe shape coding.
Insert connector without applying force
until it clicks into place.
Use dummy plugs for non-assigned
sockets.
-
Dummy plugs are available for position 2,
3 and 6.
-
Dummy plugs are not shape-coded.
The table on the right-hand side provides an
overview of the drive unit's connectors and
dummy plugs (front and side view).
A)
Battery pack connector (C50491)
B)
Connector for display and remote
control unit (C50492)
C)
e-Bike connector (C50497)
D)
5-pin dummy plug (C51636)
E)
Front light connector (C50494)
F)
Rear light connector (C50495)
G)
Connector for speed sensor (C50496)
H)
2-pin dummy plug (C51644)
H
B017-0
1
4
2
3
5
6
B016-0
Summary of Contents for TRB1
Page 1: ...BESV TRB1 Technical Manual...
