FILLING POOL WITH WATER
ATTENTION:
Do not leave pool unattended while filling
with water
1. Fill pool to drain valve.
STOP
2. Turn water off. Check that the water is not collecting on any side to
ensure the pool is level. If pool is not level, drain water and re-level
ground by digging out. Never attempt to move the pool with water in
it, serious personal injury or damage to the pool may result.
NOTE:
Your pool may contain a great deal of pressure. If
your pool has any bulge or uneven
side then the pool is not level, the
sides may burst and the water may
discharge suddenly causing serious
personal injury and/or damage to
property.
3. If level, fill pool to lowest pump valve.
STOP
4. Turn water off. Check valves for secure fit.
5. Fill pool until water capacity is 90%, DO NOT OVERFILL as this
could cause the pool to collapse. In times of heavy rainfall you may
need to empty some of the water to ensure the level is correct.
0°
Proper Water Level
TEST
pH value
Cyanuric acid
Free chlorine
Chlorine compound
Algae
Calcium hardness
IDEAL VALUES
7.4– 7.6
30 – 50 ppm
2 – 4 ppm
0
None visible
200 – 400 ppm
Pool Maintenance
If you do not adhere to the maintenance guidelines below, your health might be at risk, especially that of your children.
Using chemical tablets (not included):
NOTE:
Chemconnect or Chemical Floater must be used when you perform chemical maintenance with tablets. Your purchased item may
not include any of those dispensers, in this case you can purchase it by visiting our website www.bestwaycorp.com or at the nearest pool dealer.
IMPORTANT:
Don't use granulate tablets or throw the tablet directly in the water. The chemicals can deposit on the bottom, damage
the material and discolor the PVC.
Using chemical liquid (not included):
IMPORTANT:
Add chemical liquid in small doses and in the center of the pool to avoid direct contact between the chemicals and the
PVC surface. Direct contact can damage the material and discolor the surface.
NOTE:
Remove the chemical dispenser from pool when the pool is in use.
IMPORTANT:
After performing chemical maintenance and before using the pool, use a test kit (not included) to test the water
chemistry. We recommend maintaining your water according to the following table.
6. Check pool for any leaks at valves or seams, check any evident
water loss. Do not add chemicals until this has been done.
NOTE:
Drawings for illustration purpose only. May not reflect
actual product. Not to scale.
ATTENTION:
Do not use pump when pool is in use.
During the season of use of the swimming pool, the filtration system
must be necessarily put into service every day, enough for a long time
to assure at least a complete renewal of the volume of water.
7
