4
Owner’s Manual
Name: Sierra RidgeAIR X6; Sierra RidgeAIR Pro X6
Model: 68077E; 68078E
WARNING:
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC
This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact
with any flame source. The application of any foreign substance to the tent fabric may render the flame-resis-
tant properties ineffective.
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
Keep all flames and heat sources away from this tent fabric. We recommend that you always position your
tent upwind from a camp fire. This will reduce the chances of having embers land on your tent. In case of fire,
please find the exit to escape from the fire.
Never set up the tent near the river, under the tree of other objective hazards.
This tent designed for use in mainly moderate weather conditions.
Keep exits clear.
Make sure ventilation openings are open all the time to avoid suffocation.
Set the ventilation openings to the right position and keep them locked up.
Overload may cause danger.
KEEP THE POLES INFLATABLE ENOUGH. UNDER-INFLATION MAY AFFECT TENT PERFORMANCE.
DO NOT OVER-INFLATE THE POLES. OVER-INFLATE MAY DAMAGE THE POLES.
DO NOT OPEN THE ZIPPER OF THE AIR POLES ESPECIALLY WHEN IT’S FULLY INFLATED.
Outer tent: 15ft.11in. x 8ft.10in. x 6ft.7in. / 485 x 270 x 200cm
Inner tent: 6.88ft x 8.20ft x 6.23ft. / 210 x 250 x 190cm
Pitching dimension: 22.47ft x 15.42ft. / 685 x 470cm
SAVE THESE INSTRUCTIONS
SETTING UP THE TENT
1. Lay the tent on the ground. Pull the four corners outwards.
2. Secure the four corners by pushing the pegs into the ground loops.
3. Inflate the tent with hand pump. The ideal inflation pressure will be around 6PSI or when the poles feel fully
inflated.
4. Secure the tent with the pegs and guy ropes.
NOTE:
Drawings for illustration purpose only. May not reflect actual product. Not to scale.
MAINTENANCE AND STORAGE
：
1. Clean the tent and remove any stains with a sponge and cool water.
Please use non-detergent soap for serious cleaning.
2. Please allow all parts to dry thoroughly before you repack the tent.
This will prevent the formation from mold, odours and discolouration.
3. Replace the pole in case of air leakage.
4. Silicone spray could be uses to zippers if they stick.
5. Deflate the tent by unscrewing the screw valve.
6. Store the tent in the stuff sack and place it in a cool, dry area out of sunlight and away from heat sources
and rodents.
P3046B
P5C507
P5548
F4C073B-02
P61533
P61536
P61535
P5617
P3046B
P5C507
P5548
F4C073B-02
P61534
P61536
P61535
P5617
High pressure pump
Pressure Gauge
Peg
Screw Valve
Tent
AIRFRAME
TM
Pole (544cm, Red mark on the end)
AIRFRAME
TM
Pole (516cm,Yellow mark on the end)
Big peg
QTY.
1
1
18
3
1
2
1
4
68078E
68077E
NAME
S-S-004383
