303021293193_14x21cm_23
季澳规
AirJet
、
AirJet Plus SPA
说明书
5
CAUTION:
• We strongly recommend not to unfold and inflate the spa if the ambient temperature is
below 15°C(59°F). We suggest inflating the spa indoors, and then continuing set up
outdoors. If the outdoor temperature is lower than 6°C(42.8°F), the spa heater must
always be on. In this mode, the Freeze Shield™ system can keep the internal
temperature between 6°C(42.8°F) and 10°C(50°F) to prevent damage, such as water
freezing in the pipes or the circulation system.
Important:
If the Freeze Shield™ system isn’t working, alarms will pop up on the spa.
Be sure to check the status of your spa if the outdoor temperature is below 6°C(42.8°F).
In case of a long-term absence from home when there is a risk of temperatures falling
below 6°C(42.8°F), we strongly suggest disassembling the spa and storing it following
the storage procedure.
• Do not use the spa alone.
• People with infectious diseases should not use a spa.
• Do not use the spa immediately following strenuous exercise.
• Always enter and exit the spa slowly and cautiously. Wet surfaces are slippery.
• To avoid damage to the pump, the spa must never be operated unless the spa is
filled with water.
• Immediately leave spa if the user feels uncomfortable or sleepy.
• Never add water to chemicals. Always add chemicals to water to avoid strong fumes
or violent reactions that may result in hazardous chemical spray.
• Regarding the information pertaining to cleaning, maintenance of water, and
disposal of water, please see section "MAINTENANCE".
• Regarding the information pertaining to the installation, thanks to refer to the below
paragraph of the manual.
CAUTION:
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a timer,
or connected to a circuit that is regularly switched on and off by the utility.
After using your spa for 3-5 years, you should contact your local qualified
maintenance technician to ensure the safety and performance of the spa. The main
components, such as heating element, air blower motor and non-return valves within
the electric unit should be checked and replaced(if necessary) by professional
persons.
NOTE:
• Please examine equipment before use. Notify Bestway at the customer service
address listed on this manual for any damaged or missing parts at the time of
purchase. Verify that the equipment components represent the models that you had
intended to purchase.
• This product is not intended for commercial use.
SAVE THESE INSTRUCTIONS
PRCD WARNING
WARNING:
Before inserting plug into a power outlet, make sure the current rate of
the power outlet is suitable for the pump.
WARNING:
Using an extension lead or multi plug adaptor with the spa heater can
cause the plug to overheat, causing damage to the equipment and surrounding
items. The spa is a class I electrical appliance and must be connected directly to a
grounded socket. It is recommended to only use a socket which is resistant to
humidity and capable of high power loading. Regularly check the plug and socket for
signs of damage before using the spa – do not use the spa if the plug or socket is
damaged. If you are unsure about the quality of the electrical supply, please consult a
qualified electrician before use.
WARNING:
The PRCD plug must be tested before each use to avoid risk of electric
shock.
WARNING:
Do not use the pump if this test fails. For assistance, please visit the
support section on our website, www.bestwaycorp.com.
