Bestway BOLT X2 Owner'S Manual Download Page 2

2

5. Assemble the footrest and seat to the kayak. The footrest can be adjusted to accommodate 

the seat.

 

Safety rope installation

Insert the rope into the hole of the grommets orderly, then tighten the rope.

Caution: 

1. Safety ropes shall be fitted to both sides of the bow and stern areas only and  

shall not impede the normal operation of the craft.

2. Do check carefully if the safety rope is tightened well.

Oars Installation

S-S-003733

S-S-003733/21.0x28.5cm(#65061E)  JS-YF-2015-B-05010

Fig. 3

4. Always carefully check and ensure the air valve is not leaking before using the kayak. If 

the air valve is leaking, use the provided wrench to tighten the valve. To securely tighten 

the valve, hold the valve from the bottom of the kayak and turn the wrench clockwise. 

After you have ensured the valve is not leaking, tighten the cap to close the valve.  

    (Fig. 3)

    

Attention: 

Don't adjust the air valve when the kayak is in use.

Storage

1. Deflate the kayak by unscrewing the cap of air valve, press the spring valve and turn 

clockwise.

2. Remove all the accessories from the kayak. Use a cloth to gently dry all surfaces. Keep 

the kayak and all accessories clean and dry.

3. Fold the kayak from front to back to remove additional air. You can also drain any 

remaining air using the high pressure hand pump by connecting the hose to the 

deflatation port on the high-presure hand pump.

4. Store in a cool, dry place and out of children’s reach.

 

Repair

1. If there is a small puncture, repair it according to the instruction on repair patch.

2. If the hole is too big to be repaired with the provided patch, purchase a Bestway repair kit 

or send the boat to a speciality shop to make the repair.

Registration 

If you need to register your boat, please have the boat Hull Identification Number and model 

name ready and then visit www. bestway-service.com to obtain your Certificate of Origin, or 

you can send e-mail to [email protected] for the Certificate of Origin.

The HIN is located on the starboard outboard side of the hull and near the stern.

PLEASE KEEP THIS MANUAL IN A SECURE PLACE, AND HAND IT OVER TO THE 

NEW OWNER WHEN YOU SELL THE CRAFT.

 

Bestway Global Holding Inc.

No.3065 Cao An Road,

Shanghai, 201812, China

Tel:  86 21 6913 5588

Fax: 86 21 5913 8383

E-mail: [email protected]

Shanghai

Bestway (Hong Kong) International Ltd.

Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre,

66 Mody Road, Kowloon, Hong Kong

Tel:  852 2997 7169    

Fax: 852 2997 7869

E-mail: [email protected]

Hong Kong

Bestway Central & South America Ltda

Salar Ascotan 1282, Parque Enea, 

Pudahuel, Santiago, Chile

Tel:  562 3203 6438

Fax: 562 3203 6409

E-mail: [email protected]

Central & South America

Bestway (USA) Inc.

3411 E. Harbour Drive, Phoenix, Arizona 85034,

United States of America

Tel:  1 480 838 3888

Fax: 1 480 304 3349

E-mail: [email protected]

U.S.A.

Bestway Australia Pty Limited

Unit 10/71-83 Asquith Street,

Silverwater, NSW 2128, Australia

Tel:  61 2 9037 1388

Fax: 61 2 9737 9423

E-mail: [email protected]

Australia

Bestway (Europe) S.r.l.

Via Resistenza 5,

20098 San Giuliano M.se (Mi) - Italy

Tel:  39 02 9884 881

Fax: 39 02 9884 8828

E-mail: [email protected]

Europe

www.bestway-global.com

www.bestway-service.com

Reviews: