2
Storage
1. Deflate the platform by unscrewing the cap of air valve, press the spring valve and turn clockwise.
2. Remove all the accessories from the platform. Use a cloth to gently dry all surfaces. Keep the platform and all accessories
clean and dry.
3. Fold the platform from front to back to remove additional air.
4. Store in a cool, dry place and out of children’s reach.
NOTE:
Do not unfold this product when the temperature is low, leave the product in the room temperature (over 20ºC) for 24
hours before inflation.
Repair
• Fully clean the area to be repaired.
• Cut the correct size from the repair patch material.
• Apply only the amount of glue (not included) needed to cover the repair site.
Deflation
Maintenance:
1. Inflate according to the PSI marked besides the valve;
2. To avoid the long-time exposure to sunshine or rain, put the outside cover on top for protection when it not being used;
3. Clean it with mild soap water and soft cloth in case it is not going to be used for a long time. Dry it before putting them away.
Store it at a dry and shady place and keep it out of reach of Children.
Fig. 1
Fig. 2
1
2
3
4
4.There are two D rings at the bottom of the platform. The included anchor bags can be tied to them in order to secure your
platform in the water.
Note:
Inflate with air pump (not included).
Anchor Bag
D Ring
303021193334_14x21cm_#65311E; #65314E
