www.bestwater.de
14
Brine is not drawn in.
Too low pressure
Increase the water pressure to at least
1,5 Bar
Blocked hose between
brine tank and control
unit
Check and clean the hose
Leaky hose between brine
tank and control unit
Replace the hose with a new one
Injector damaged
Contact a specialist
Blockage in the sewer line
Check the drainage pipes
Constant drainage into
the wastewater system
Impurities in the control
unit
Check and clean the control unit and
observe the behaviour at various stages
of regeneration
Power interruptions
during regeneration
Check the power supply
The display shows E1-E14
Damage to the electrical
system or electronics
Contact a specialist
Purified water is salty
Rising process impaired
Check the pressure, drain lines and
extend the rinse phase
13. Certificate
RX Controller are certified
1.
CE - Conformity to EMV-Guidelines
2014/30/EU
14. Disposal
After expiry of the period of use, the device must no longer be disposed of as waste. Rather, the fixed
water softener appliance should be brought to a collection point for electronic waste. The user is
responsible for the proper disposal of the device. Failure to comply with the above rules may result
in a penalty being imposed. Please observe the regulations applicable to your state.
Proper disposal of the unit ensures proper waste treatment in an environmentally friendly manner.
15. TERMS OF WARRANTY
- The manufacturer warranties the smooth operation of the water softener if it has been operated
according to the instructions in this manual and with regular refilling of the salt.
- The stationary water softener is guaranteed for 2 years from the date of purchase.
- The warranty is conditional on proper installation and commissioning of the device in accordance
with the instructions by a qualified person.
- It is the responsibility of the user to have the device tested by an authorized person at least once a
year.
Summary of Contents for BWE 2000
Page 2: ...www bestwater de 2...
