5
4.
Align the sensor housings on each
foam block so they fit into the timer
holes punched in the middle of each
lane. The foam block acts as a spring
to keep the sensor securely in place.
5.
Slide a ¼-20 hex head bolt into the
mounting slot at the edge of the track
near the start lever and mount the
Reset Switch Bracket as shown in the
picture below. Use a hex nut to fasten
the bracket to the track.
6.
Attach the Start Gate Switch in the
same manner using the 3
rd
mounting
slot from the edge of the track. Slide
the start lever (shown in blue for
clarity) under the start gate as shown
so that the switch is activated as the
start gate drops. See below.
