Bestron ABL800WB, Instruction Manual

Page: 21 / 24

instruction manual
21
English
cleAning And MAintenAnce - cleaning or replacing the HePA filter
For best results clean or replace the HEPA filter after every second or third use of the vacuum cleaner, or
more frequently if the filter is visibly blocked.
Clean the HEPA filter regularly to avoid that
the filter becomes clogged and the engine
overheated.
1. Remove the waste from the dust receptacle (see
“Removing waste from the dust receptacle”).
2. Pull the cover/filter from the dust receptacle.
3. Turn the HEPA filter clockwise to release it, and
then remove it from the cover. Please be sure
not to dispose the rubber ring (A) with the rest
of the waste.
4. Rinse both thoroughly in lukewarm water.
5. Allow the HEPA filter and the holder to dry
thoroughly.
6. Fit the holder and HEPA filter to the dust
receptacle in the reverse sequence. If
necessary, replace the HEPA filter.
• Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in
(electrical) damage.
• Do not clean the filter in a washing machine.
• Do not dry the filter with a hairdryer.
tHe enVironMent
• Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
• When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user’s instructions or the packaging.
• The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
• Contact your municipality for the address of the appropriate collection point in your neighbourhood.
guArAntee terMs
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried out
during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty appliance
(in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety
regulations.
c. Connection to a mains voltage other than the voltage specified on the type plate.
d. Unauthorized modifications.
A