Bestron ABH401, Instruction Manual

Page: 20 / 36

Instruction manual
20
English
oPerAtIon - General
The appliance is intended only for domestic use,
not for professional use.
1. Thermostat dial
2. On/Off indicator light
3. (Hot) air outlet
4. Suspension bracket
5. Foot
6. Plug and lead
Figure 1
BeFore FIrst use
Remove the frost protector from the packaging and remove all the packaging materials.
InstAllAtIon - Feet
If you wish to use the frost protector in standing position, the two support feet must be fitted by using the
screws. Please see figure 2.
Figure 2 Figure 3
InstAllAtIon - suspension bracket
If you wish to hang the frost protector from a wall, the suspension bracket must first be attached to the wall
(see figure 3 above).
1. Indicate on the wall where you wish to attach the bracket. Make sure the frost protector will hang
horizontally.
2. Drill two holes in the wall at the marked locations. Make sure the holes are big enough to fit the screw
plugs.
3. Push the plugs into the holes.
4. Use the screws to attach the suspension bracket to the wall and, if necessary, adjust it horizontally.
5. Slide the frost protector down onto the suspension bracket.
6. Screw the suspension bracket to the side of appliance.
When hanging the frost protector from a wall, make sure there is enough free space around the frost
protector. There should be the following amount of free space:
- At the top 70 cm
- At the bottom 60 cm
- At the sides 40 cm
7
2
6
3
4
5
1