4
Safety Inspections and
Consumer Warnings
Do not proceed with installation unless you
are qualified to complete the installation in a
safe fashion and as described herein. Do not
use these products unless you have read all
of the instructions and understand how these
products work and what limitations, if any,
they may have.
Failure to read and follow
these instructions could result in serious
bodily injury or death!
It is the Consumer's responsibility to inspect
all screws, fasteners and fittings on a daily
basis, tighten or replace them as necessary,
and to regularly inspect the entire BestRest
System for signs of missing parts, excessive
wear, metal fatigue, or imminent failure.
Should any of these be observed the
BestRest System should be removed from
the motorcycle and not used until inspected
and repaired by BestRest Products.
It is the responsibility of the Consumer to
evaluate the suitability of these products for
personal use.
Consumers must evaluate
whether these products meet their needs and
whether these products can be mounted and
used in a safe fashion.
The Consumer
accepts full and complete responsibility for
selection of products and for mounting and
maintenance of these products. The
Consumer agrees to follow and abide by any
and all instructions, recommendations,
warnings, or other information supplied or
published by BestRest Products, LLC.
BestRest Products, LLC, it's employees,
agents, and owners assume no liability of any
kind whatsoever for property damage,
personal injury or other losses resulting from
the Consumer’s failure to properly install or
maintain these products, for unauthorized
modifications of any kind, for use of
unauthorized parts (including bushings,
screws, pins, or other fasteners), or for
misuse of any BestRest Product in a fashion
not intended by BestRest or described as a
suggested application in BestRest literature.
Because installation of these products is
done by others outside our control, we cannot
assume any liability or responsibility
whatsoever for improper or unsafe installation
or items installed contrary to the latest
published instructions, that are improperly
secured or maintained, that are improperly
tightened or otherwise secured, or which are
otherwise improper fitted to the motorcycle.
Only authorized BestRest replacement parts
(assemblies, screws, fasteners or fittings)
shall be used when mounting or installing any
BestRest products. Authorized replacement
parts may be purchased only from BestRest
Products.
Parts from other sources or
vendors are not covered under warrantee
and will void any Consumer claims against
BestRest or others. Any use, modifications,
or applications of any BestRest Product,
other than those authorized by us in writing,
are specifically prohibited.
BestRest, BestRest System, BestRest-GS,
BestRest Products, BackRest, and
CargoRest, BackPad, designs and logos are
all trademarks of BestRest Products, LLC.
The BestRest System is registered and
patented with the US Patent and Trademark
Office. Please respect our Trademark,
Copyright and Patent rights.
Rev. 05/15/03
©
2003 BestRest Products LLC