39333/39343 pg 2
1201 Rev. B
3/8-16 x 1 1/4" Bolt, Qty - 4
Flat Washer, Qty - 2
Plastic Flat Washer,
Qty - 2
M8-1.25 x 35mm Bolt, Qty - 8
1/4-20 x 1 1/4" Bolt, Qty - 4
5/16-18 x 1 1/4" Bolt, Qty - 4
Parts List and Hardware Identification
Seat, Qty - 1
Installation Instruction
Manual, Qty - 1
39333/39343 pg 1
1298 Rev. 1
TrailMax™ Fold and Tumble
Rear Seat
Installation Instructions
Before you begin installing this seat, please read all installa-
tion instructions and warnings thoroughly.
This seat is designed to be used on the model vehicles
described above. Use of this seat on any other vehicle or
failure to install this seat properly may result in an improperly
mounted seat and could result in unexpected movement of
the seat and loss of control of the vehicle, thereby placing the
occupants of the vehicle and others in a potentially danger-
ous situation.
This seat system is intended to be used with seat belts at all
times. Do not rely on the seat to maintain the seating position
of occupants, in the event of an accident.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions pro-
vided when installing top. Failure to do so may result in a poor
fitting top and could place occupants of the vehicle in a
potentially dangerous situation.
WARNING
For: All Jeep
®
CJ5s, CJ7s and Wranglers 1955-1995
Part Number: 39333 Vinyl
39343 Cloth
Jeep
®
is a registered trademark of Chrysler and
Bestop is not affiliated with Chrysler Corporation.
NOTE: In 1985 and older vehicles, the seat
installation will be easier with two people.
Tools Needed
Adjustable Wrench or
9/16" Wrench
7/16" Wrench
1/2" Wrench (older models)
10mm Wrench (older models)
Safety Glasses
1985 or Earlier Vehicles
25/64" Drill Bit
7/16" Drill Bit (older models)
Lock Down
Bracket, Lt,
Qty - 1
Floor Mounting
Brackets, Qty - 2
Cotter Pin, Qty - 2
Tapping Plate, Qty - 4
Lock Down
Bracket, Rt,
Qty - 1
Note: Use only the Bestop hardware
provided in the kit.
M8-1.25 Hex
Nut Qty - 8
