Rev. D 1112
42908 / 44908 / 42905 / 42906 / 44906 pg. 3
HighRock 4x4
TM
Front Bumper Installation Instructions
If you have a Fare Lead Roller, use the mounting
hardware provided with the roller to install it on the
Fare Lead Plate.
Install Fare Lead Roller on
Fare Lead Plate
Use a socket wrench with a 18mm socket
to remove the two (2) bolts on the top of
the bumper on each side, four (4) bolts
altogether. When these are removed, use a
19mm socket to remove the bolt underneath
the bumper on each side. Set these bolts
aside to be used to install the HighRock
4x4
TM
Front Bumper.
Remove the Original Bumper
If you intend to install a fare lead
roller and/or a winch on your bumper,
you will need to install them on the bumper before
you install the bumper on the vehicle.
If you decide at a later date to install a fare lead
roller or winch on your vehicle, it will be easiest
to remove the bumper from the vehicle before
installing.
If you wish to install a winch without a fare lead
roller, skip step 2.
If you do not wish to install a fare lead roller or
winch at this time, skip steps 2 and 3.
NOTE
Fare Lead Plate
Fare Lead
Roller
Use the hardware supplied
with your fare lead roller to
secure it to the Fare Lead
Plate
Bumper
Remove 19mm
Bolt
Remove 18mm
Bolts
Bumper
