52528 pg 1
Rev. B 0703
Header Bikini
Installation Instructions
WARNING
For: Jeep
®
Wrangler 2003
Part Number: 52528
with or without Door Surround
This product is designed to enhance the appearance of the
vehicle. Do not rely in any way on the components of this
product to contain occupants or cargo within the vehicle, or
to protect against injury or death in the event of an accident.
Never operate vehicle in excess of manufacturer’s specifi-
cations.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions pro-
vided when installing this product. Failure to do so could
place occupants or cargo of the vehicle in a potentially
dangerous situation. After installing or reinstalling, check to
make sure it has been properly installed.
Installation Tips
Before you begin installing this product, read all instructions
thoroughly. Below are a few tips to make this installation
easier. After completing the installation, keep these instructions
for further reference.
For a smooth fit:
For ease in installation, the
Bikini
should be installed at
temperatures above 72
°
F. Below this temperature, the fabric
may contract an inch or more, making it difficult to fit to the
vehicle.
It is normal for the fabric to contract and wrinkle when stored in
the shipping carton. Within a few days after the installation, the
fabric will relax and the wrinkles will disappear.
DO NOT INSTALL THIS PRODUCT ON ANY VEHICLE OTHER THAN THOSE LISTED ABOVE.
This product is only designed for the vehicles listed above. Failure to install this product on the proper
vehicle could cause injury to the vehicle occupants and damage to the product.
Important Note: This product must be used with a TJ Header Windshield Channel, Number 51238-01
or in conjunction with your TJ Supertop Header, Number 51709-01.
