51254/51253 pg 2
0300 Rev. A
Parts List and Hardware Identification
SeatRiser,
Qty - 1
Tools Needed
9/16 Wrench
13 MM Hex Socket Head
#30 Torque Wrench
Safety Glasses
Riser Installation
Caution
Note: Before beginning the riser installation, set
the parking brake, place the vehicle in gear or park
and chock the wheels to reduce the risk of the
vehicle unexpectedly moving, which could result
in serious injury.
Installation Instruction
Manual, Qty - 1
WARNING
Step One
Remove the existing seat from the vehicle.
Remove the four (4) nuts that mount the seat track
slides to the riser. Do not throw away the four (4)
nuts since they will be reused.
The nuts are under the ledge on the riser.
Next remove the bucket seat and track slides from
the vehicle.
If your seat track slide is not attached to the riser
with nuts then it has bolts coming down through the
slide and into the riser. To remove the front bolts
slide the seat all the way forward and remove the
two bolts that attach the slider to the seat. Next slide
the seat all the way back and remove the two rear
bolts attaching the slider to the seat. Remove the
seat and then remove the slider from the riser.
Remove the old riser from the floor with a 9/16"
wrench and save the four bolts.
Seat Track Slide
Remove Nuts
Seat Track Slide
Remove Nuts
Seat Riser
Track Bar
Left Side Shown
Riser Floor Bolts
51254/51253 pg 1
0300 Rev. A
Seat Riser
Installation Instructions
Before you begin installing this seat riser, please read all
installation instructions and warnings thoroughly.
This seat is designed to be used on the model vehicles
described above. Use of this riser on any other vehicle or
failure to install this seat properly may result in an improperly
mounted seat and could result in unexpected movement of
the seat and loss of control of the vehicle, thereby placing the
occupants of the vehicle and others in a potentially danger-
ous situation.
This seat system is intended to be used with seat belts at all
times. Do not rely on the seat to maintain the seating position
of occupants, in the event of an accident.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions pro-
vided when installing this product. Failure to do so may result
in a poor fit and could place occupants of the vehicle in a
potentially dangerous situation.
WARNING
For: All Jeep
®
CJ5s, CJ7s and Wranglers 1976-1995 Part Number: 51254 RT
51253 LT
Jeep
®
is a registered trademark of Chrysler and
Bestop is not affiliated with Chrysler Corporation.
