P3 - 44942 Rev. A 1216
© 2016 Bestop, Inc.
Page 3
Installation Instructions - Rear Bumper Departure Roller
Section 1
Attach Departure Roller to Vehicle Frame & Bumper
Step 1
Tools
Step 2
Step 1
From the inside of the Modular Bumper,
remove the four (4) bolts and washers holding
the Inner Frame Brackets to the vehicle frame
and the Modular Bumper.
Step 2
Attach the Departure Roller to the vehicle frame
and Modular Bumper using the Inner Frame
Brackets and the M8-1.25x110 Bolts and
M8 Washers that you removed in the
previous step.
Make sure that the tabs on the top of the end-caps
of the roller fit into the rectangular holes in the
bottom of the bumper.
Tighten all fasteners.
Socket wrench
and 13mm socket
Roller tab fits into
rectangular hole in
bottom of bumper