Section 2
Install Seatback Covers - continued
P7 - 29280 - Rev. D 1115
© 2015 Bestop, Inc.
Page 7
Step 1
Step 2
Installation Instructions - Seat Covers, Front Kit
Step 1
Tilt the seatback forward and tuck the flap and
the straps at the bottom of the seat cover
between the seatback and the seat bottom, so
the straps are underneath the seat.
Bring the straps forward, and drape them over
the slide release bar at the front of the seat.
Repeat this procedure for the passenger seat.
Step 2
Before you tuck the flap at the bottom of the
cover between the seatback and bottom,
tuck the airbag flap into the airbag opening
with one hand, while at the same time
reaching up under the front of the seat cover
with the other hand to pull the airbag flap
tight and smooth inside the seat cover.
Repeat this procedure for the passenger
seat.
NOTE: the airbag flap
should lie flat and smooth
under the seat cover.