10
1-5 Installing the Booster Kit
Once input signal level is determined to be in conjunction with the
technical requirement of booster, please proceed to install the booster kit
with following procedures:
1.
Connect the booster RF output directly to the antenna with appropriate
cable.
2.
Attach the booster RF input to the DC Injector with coaxial cable.
Note
: The type and gain of antenna or type and length of cable depend
on your purpose of using booster. Please contact manufacturer for
further information.
Warning
: The cable between DC injector and booster carries the DC
voltage and should not be connected to devices other than
booster.
3.
Connect the coaxial cable leading from the DC Injector to the antenna
on the access point.
4.
Plug the power cable leading from the DC Injector into any available
110/220 V electrical outlet.
5.
Check the LED indicator of the DC injector. If the LED is on, it means
the booster kit is operating.
