BESTEK BNX-M87, User Manual

Page: 38 / 45

38
Change Settings [Auto]
Select the Serial Port base address from:
[Auto], [IO=3F8h; IRQ=4;], [IO=3F8h; IRQ=3,4,5,6,7,10,11,12;], [IO=2F8h; IRQ=3,4,5,6,7,10,11,12;],
[IO=3E8h; IRQ=3,4,5,6,7,10,11,12;], and [IO=2E8h; IRQ=3,4,5,6,7,10,11,12;]
Device Mode [Serial Port Functio..]
Select the Serial Port mode from R-232/422/485
Parallel Port Configuration
Parallel Port [Enabled]
Enable/Disable Parallel Port
Change Settings [Auto]
Select an optimal setting for Super I/O devices from:
[Auto], [IO=378h; IRQ=5;], [IO=378h; IRQ=5,6,7,9,10,11,12;], [IO=278h; IRQ=5,6,7,9,10,11,12;], and [IO=3BCh;
IRQ=5,6,7,9,10,11,12;]
*This setting is available only when Parallel Port is enabled.
Device Mode [STD Printer Mode]
Select the Printer Port mode from:
[STD Printer Mode], [SPP Mode], [EPP-1.9 and SPP Mode], [EPP-1.7 and SPP Mode], [ECP Mode],
[ECP and EPP 1.9 Mode], and [ECP and EPP 1.7 Mode].
*This setting is available only when Parallel Port is enabled.
NCT6791D HW Monitor
Smart Fan Configuration
CPU / System / Chassis Smart Fan Control [Enabled]
Enable/Disable Smart Fan Control.
Fan Control Mode [Thermal Cruise Mode]
Select a proper fan control mode from:
[Manual Mode], [Thermal Cruise Mode], [Speed Cruise Mode], and [Smart Fan IV Mode]