BESTEK BNX-H81, User Manual

Page: 34 / 52

34
H/W Monitor
Smart Fan Function
Smart Fan Mode
Select a proper Smart Fan Mode from: Full On, Automatic, or Manual
Fan Off Temperature Limit
Fan will be turned off with temperature lower than this setting. Options: 0-127.
Fan Start Temperature Limit
Fan will be turned on with temperature higher than this setting. Options: 0-127.
Fan Start PWM
Fan will be turned on with this PWM setting. Options: 0-255.
Serial Port Console Redirection
Console Redirection
Enables or disables Console Redirection function of each Serial Port.
Console Redirection Settings
Terminal Type
To operate the system’s console redirection, you need a terminal supporting ANSI terminal protocol and a RS-
232 null modem cable connected between the host system and terminal(s). This setting specifies the type of
terminal device for console redirection.
Bits per second, Data Bits, Parity, Stop Bits
This setting specifies the transfer rate (bits per second, data bits, parity, stop bits) of Console Redirection.
Flow Control
Flow control is the process of managing the rate of data transmission between two nodes. It’s the process of
adjusting the flow of data from one device to another to ensure that the receiving device can handle all of the
incoming data. This is particularly important where the sending device is capable of sending data much faster
than the receiving device can receive it.
Recorder Mode, Resolution 100x31
These settings enable/disable the recorder mode and the resolution 100x31.
Legacy OS Redirection Resolution
This setting specifies the redirection resolution of legacy OS.
Redirection After BIOS POST
Enable legacy console redirection for legacy OS.