background image

3. 

Battery removal and installation.

 

 

Remove the battery

 

  How 

to 

ride 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Install the battery

 

 

1. 

Unscrew the pedal cover 

screw counterclockwise.

 

 
 
 
 
 
 

 

4.Lift the battery strap and 
take out the battery.

 

 

2. 

Lift the pedal cover from 

the quick-release screw on 

the rear wheel side.

 

 
 
 
 
 
 

3. 

Unplug the charging plug 

and the power plug of the 

controller.

 

 

 

1. 

Wear helmets and other protective equipment before riding.

 

 
 
 
 
 
 
 
 
 
 
 

2. 

Long-Press the power button to turn on scooter, stand on the pedal with 

one foot, press the accelerator, and push the other foot back on the ground.

 

 

 

1. 

Put the battery vertically 2.Connect the charging plug 3.Cover the pedal and

 

into the scooter.

 

and the power plug of the 

controller to the battery.

 

fasten the silicone edge 

of the pedal.

 

 
 
 
 
 

 

 
 

 

-

07

-

 

4. 

Install the screws and 

tighten it clockwise.

 

 

3. 

When the electric scooter is sliding, 

put the other foot on the pedal and 
keep both feet remain stable.

 

-

08

-

 

 

4. 

Continuously press the throttle to 

speed up. Turn the handle to adjust 
the direction.

 

Summary of Contents for X9












Reviews: