CLEANING AND STORAGE
SETTING TIMER
SELF-CLEANING MODE
Pg. 6
•
To put the ice maker into long storage, do the following:
1.
Turn off the unit, unplug it, and remove all the ice cubes.
2.
Shut off the main water supply, then remove the water hose from the water inlet and faucet.
3.
Pull the water drain pipe out from within the ice maker to manually drain water. Remove the drain
hose and replace the water outlet plug.
4.
Dry the interior and exterior with a soft cloth. Leave the door open to allow for air circulation.
5.
If necessary, cover the unit with a tarp or plastic bag.
•
Unplug the machine before cleaning or storage.
•
Do not clean your ice maker with alcohol or flammable fluids.
•
Wipe the outside of the ice maker regularly with a soft cloth, mild detergent, and warm water.
•
Wipe the inside with a soft cloth and solution of 28g of household bleach or chlorine and 7.5L of hot water.
Rinse thoroughly and drain the water.
•
The water seeping pipe, water tank, and ice detecting board must be cleaned periodically with a natural cleaner
and water. Pull the water seeping pipe up and outwards to remove it. Rinse thoroughly and drain the water.
•
Every 6 months you may want to deep clean the ice machine with a
nickel-safe ice machine cleaner
.
1.
Mix 300ml of cleaner with 2.8L of warm water,
then divide it into 2 containers.
2.
Pour one container of the cleaning solution into
the water tank and wait 5 minutes.
3.
Turn on the unit and run the self-cleaning mode.
Manually drain the water.
4.
Repeat steps 1-3 with the other container of
cleaning solution.
5.
Run a normal self-cleaning mode twice to flush
out the cleaning solution. Manually drain the
water after every self-cleaning mode.
•
It is recommended that you discard the batch of ice after cleaning.
1.
Press the
TIMER/CLEAN
button, then use the
+
and
–
buttons to increase or decrease time.
2.
When in standby mode, the timer sets the time until the ice making process begins.
3.
When in ice making mode, the timer set the time until the ice making process ends.
4.
To adjust or cancel a timer, press the
TIMER/CLEAN
button and increase/decrease the time.
•
Press and hold the
TIMER/CLEAN
button to enter self-cleaning mode which lasts for 20 minutes. The machine
will pump water through the unit to clean it.
•
After 20 minutes, the water pump will stop and the unit will automatically refill the water tank.
