12
Step 6
: Attach the footplate to the base using the two hooks by lowering it onto
the top surface of the base. Make sure the hooks are sitting in between the two
small blocks protruding at the back of the base.
Step 7
: Install the kneepad frame with the plastic U washer to the kneepad.
Choose one of the three holes on the tube depending on the desired kneepad
height. Then secure it using bolt, nut and washers as follows.
Step 8
: Pull the depth adjustment handle down and insert the kneepad frame
into the receiving tube located on the mast. Release the handle and continue
sliding the kneepad frame until the handle clicks to ensure kneepad frame is
locked in place.
Summary of Contents for SA400H
Page 31: ...30 Notes...
