BestCam BST800, User Manual, Page: 21 / 30

Basic Operation
18
3.1.2. When the camera is under the "ON" mode
After you have finished all the settings under the SETUP mode and
have had the general location determined, you can switch the camera to
ON and get it to work. The screen will display 10 seconds countdown
and the LED indicator will also light up for 10s till the countdown ends.
Then the screen will be off. The camera begins to operate
independently and enters standby mode.
If wild animals enter the detection range of the motion sensors, the
camera will be activated and detect the motion.
If wild animals keep on moving in the detection zone of the sensor, the
camera will take photos or record video automatically.
When wild animals leave the detection zone of the sensors, the camera
will be deactivated and turn back into standby mode.
3.1.3. When the camera is under the "OFF" mode
The camera is completely turned off.
3.2. How to play the recorded videos and photos?
You can play the recorded files through the camera screen directly or
connect the camera to the PC by the mini USB cable, or remove the
memory card and use a card reader to read it on the PC.