Digital Wireless Receiver
I. Parts of Introduction
Up Side
1.
Light of Power ON/OFF
：
Green light is on when it is powered on, standby is red.
2.
Power ON
：
Press &hold for 2 seconds (light from red to green) to turn on the receiver
.
Power OFF
：
Press &hold for 3 seconds (light from green to red) to turn off the receiver
.
Front Side
1.
Match Button on Microphone(MIC1
、
MIC2): It is used for match between microphone and receiver
.
Back Side
2. DC In: Connect Power Supply and Input power at 5V (DC)
.
3. MINI USB: Connect to PC/ Notebook, as the switch of previous/next page in presentation mode
4. Audio Output (MIC):
ψ6.3mm audio output hole connects receiver to power amplifier (mixer)
5. Echo Control: Echo effects control
6.
LINE In: Connects to background music or Karaoke music
7. LINE Out: Connect 3.5mm cable or connect to powered speaker through composite video connector
II. Installation and Operation of Receiver:
1.
Connection of Power Input
：
Connect input side of 5V
（
DC
）
Power Supply to power input hole and connect the other side to AC Power
Outlet.
(
▲
Note
：
AC Power spec of POWER SUPPLY must fit with voltage range locally
.
)
