6
2. The Panel
①
The touch panel possesses high penetrability.
②
The product adopts 5.0 inch TFT screen.
3. Power Source
One of the following three power sources can be used.
①
Rechargeable lithium battery: 3.7V/1270mAh
②
Connect with PC via USB cable. (With charging function)
③
A power adaptor with DC output 5V/1A.
* The
②
and
③
power source can be used together with the battery
.
3.1 Replacing Battery
Insert:
①
Remove the battery compartment cover.
②
Insert the battery into the compartments.
③
Close the battery compartment cover securely.
Remove:
①
Press [ON/OFF] to switch off the power.
②
Please remove the battery as instructions above.
Notes:
①
When the power is insuf
fi
cient, please insert the USB cable or power adaptor to
recharge the battery.
②
The power is insuf
fi
cient when just charged, which means the battery is no
longer usable. Please get a new one.
③
Personal data will be retained even if the device is out of power. Please turn the
device off
fi
rst, and then take out the battery 3 seconds later. Otherwise, data
may be displayed incorrectly.
3.2 Recharging Battery
If it is the first time to use the device, please recharge battery first. You
can recharge the battery through PC or special adaptor that comes with the
device.
①
Through PC: connect the device and PC with USB cable. It takes about
5.5 hours to fully recharge.
②
Through adaptor: connect the device and power supply with the
adaptor. One end is inserted into the USB jack, the other is inserted
Introduction of the Device
Summary of Contents for CD-737
Page 1: ......
