background image

7

If anything ever 

If anything ever 

looks wrong or like 

looks wrong or like 

it may damage your 

it may damage your 

aircraft, 

aircraft, 

please call us.

please call us.

800.914.2003

800.914.2003

Loading Your Plane

Double check your plane to 
make sure the tug is correctly 
attached and the First Time Setup 
instructions were followed. 

1. 

Drive up to within one to two 
feet of the airplane. Use locking 
arm to open left connecting arm. 
Turn power OFF and manually 
push tug into position. We 
strongly recommend following 
this step in case you accidentally 
bump the throttle while close to 
your aircraft.  

2. 

Position the tug with arms on 
either side of the plane.  

3. 

Insert the right arm into/onto tow 
connection. 

4. 

Use locking arm to close the left 
connecting arm. 

Moving Your Plane

 

Check the surroundings of the plane, 
remove any obstructions, and verify you 
have removed the wheel chocks. We 
recommend slow and steady movements 
when moving your plane. The right thumb 
control moves the tug forward, and the left 
thumb moves the tug backward. As you are 
moving your plane, be sure your nose gear 
can make the turns you are taking. 

As the operator, 
you are responsible 
for knowing the 
limitations of your 
specific aircraft. 

Summary of Contents for ALPHA A2





















Reviews: