4
Do not use unless all screws are tight. At least every six months, check all screws
to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use
of the product until repairs are made by your dealer using factory authorized parts.
Illustration # 3
Illustration # 4
P-5
Detach 2 screws from each side
of Framed Board (P-5) with
Phillips Screwdriver as shown in
illustration # 3.
4.
Screw
Screw
Screw
Install Flange (C) on each side of the
board by using the same 4 screws from
step 5 and tighten with Phillips Screw-
driver. See illustration # 4.
5.
C
P-5
C
Screw
Screw
