5
Set the bottom of Writing Board (P-1) on
L-Brackets (B) on the wall, make sure
writing board is on the desired location.
While someone holds this panel tightly
against the wall, setting on the bottom L-
Brackets (B), fasten the L-Brackets (B) to
the bottom of Writing Board (P-1) by
using 1/2” Self Drill Screw (C).
The person holding the panel should Con-
tinue firmly pushing the Writing Board
against the wall. Use ladder to reach
comfortably to the top L-Brackets (B).
Push the top L-Brackets (B) down until
they are flush with top of the Writing
Board (P-1), use 1/2” Self Drill Screws
(C) to fasten the L-Brackets to the top of
the writing board. See illustrations # 3
4.
P-1
C
C
B
B
If you have Top Tackboard (P-7)
please follow Step 5.
5.
Illustration # 3
Illustration # 4
Top mark
B
A
Top Mark
Leveled line
Leveled
line
Place the two brackets on the back of the
Top Tackboard (P-7) behind the Writing
Board (P-1), as it shown in illustration # 4.
Tackboard (P-7) should be sitting on the
writing board L-Brackets screw heads. Mark
the top of Tackboard (P-7) on the wall in 3
locations preferably over the wall studs.
Remove the Top Tackboard (P-7) and pro-
ceed with fastening the L-Brackets (B) by
using the 1 1/4” Screw, 5/8” below the mark
you made on the wall (leveled line). See
illustration # 4a for detail. Place the Top
Tackboard back on the wall, make sure you
are flush with the Writing Board (P-1) on
both sides. Push down the L-Brackets (B) to
the top of the Top Tackboard (P-7), and
fasten using 1/2” Self Drill Screws (C). See
illustration #4b.
B
C
P-7
B
C
C
B
P-7
Illustration # 4b
Illustration # 4a
Should you require assistance
during assembly, please call our
Customer Service Department
Monday - Friday 8 a.m. - 5 p.m.
Central Standard Time
Toll-Free Customer Service
1-800-749-2258
Brackets
