Insert 4 StorageTubs (P6).
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
3.)
Attach 4 Locking Casters (C) the Bottom of the 2 Legs
(P-1)
.
Tighten casters using Caster Wrench (E). See
Illustration #1.
2.)
To Assemble:
Identify and Separate all the Parts and Hardware.
1.)
Attach Markerboard Panel (P-2) to
the 2 Legs (P-1) using 4 Screws
(A), 4 Washers (G) and 4
Threaded Posts (B)
as shown in
Illustration # 2
. Make sure to
place the Washers (G) between
the Marker Board and the Leg.
Tighten all Screws using Allen
Wrench (F).
Illustration # 1
Illustration # 2
P-1
C
E
4.)
Repeat Step 3 to attach the second Markerboard Panel (P-2) to the other side of the
Welded Legs (P-1).
5.)
Hook the Bottom Tray (P-3) over the two horizontal brace tubes on both Welded Legs (P-1)
as shown in Illustration # 3.
Illustration # 3
B
P-2
P-1
A
G
P-3
P-1
P-1
759M, 770_9-1-11
