BEST POWER 610 - UPS Installation
2.3 Types of Loads
The Best Power 610 UPS is designed to power all modern computer
equipment “loads.” The UPS output is specifically designed to work
with switching power supplies found in today's microprocessor-
based equipment.
Laser Printers and your UPS
Best Power does not recommend protecting laser printers with this
UPS. Laser printers have a heating cycle which provides adhesion
of the toner to the paper. This heating cycle draws large amounts of
electrical current and will overload your UPS.
If your printer is mission-critical and you want to protect it with a
UPS, the UPS must be sized to accommodate the high peak
current surge of the printer.
2
2.4 UPS Locations
Your UPS should be in a controlled environment. A controlled
environment is one that is indoor, temperature-controlled and free
of conductive or semiconductive contaminants. The Best Power
610 is intended for indoor use only. There should be
adequate ventilation and the location should be free of dust and
fumes. Do not install the unit next to open windows where
uncontrolled environmental conditions could affect the unit. Do
not install the unit in any type of enclosure without first calling
Best Power Technical Support. The unit must have unrestricted
air flow.
CAUTION
The environmental
specifications
shown in Table 1
(right) show the
temperature and
humidity limits of
the UPS. Do not
exceed these limits.
2.5 Installation and Startup
If your UPS unit has an AC inlet plug, plug the unit into a wall
socket. If you have a hardwired unit, refer to the separate
Installation and Wiring Instructions shipped with hardwire units.
Table 1
ENVIRONMENTAL SPECIFICATIONS
Ambient Operating
< 1500 m (4,900 feet) 0
o
C to 40
o
C (32
o
F to 104
o
F)
Temperature
1500 - 3000 m
0
o
C to 35
o
C (32
o
F to 95
o
F)
(4,900 - 9,800 feet)
Ambient Storage
All Models:
-15
o
C to 50
o
C(5
o
F to 122
o
F)
Humidity
All Models:
0% to 95%, noncondensing
Altitude
All Models:
3000 m (9,800 feet) max.
