Best Fitness BFOB10R, Owner'S Manual

Page: 10 / 20

10
Be careful to assemble all components
in the sequence they are presented.
A. Insert Round End Caps (43) into Back Rest Support (6).
Install Back Rest Support (6) as shown in the diagram.
B. Insert four Square End Caps (41) into Back Pad Frame (4).
C. Connect Back Rest (11) to Back Pad Frame (4) using:
Four 26 (M8x45 hex head bolt)
Four 42 (M8 lock washer)
Four 28 (M8 washer)
NOTE:
Make sure Back Pad Frame (4) is completely attached to the shaft on Seat
and Backrest Frame (2) while assembling.
D. Connect Seat Pad (10) to Seat and Backrest Frame (2) using:
Four 27 (M8x25 hex head bolt)
Four 42 (M8 lock washer)
Four 28 (M8 washer)
E. Insert Square End Caps (40) and Round End Cap (39) into Leg Developer Pivot
Frame (3).
F. Connect Leg Developer Pivot Frame (3) to Leg Developer Frame (1) using:
One 24 (M12x80 hex head bolt)
Two 30 (M12 washer)
One 33 (M12 nylon lock nut)
Two 44 (M12 Bushing)
G. Thread M8x30 Hex Head Bolt (38) into Leg Developer Pivot Frame (3) securing
Rubber Stopper (37).
H. Install M25 Spring Collar (36) onto the Weight Horn on Leg Developer Pivot Frame
(3).
s t e p
3