Best Fitness BFCCO10, Owner'S Manual

Page: 18 / 22

18
s t e P
5
Be careful to assemble all components
in the sequence they are presented.
nOte:
Finger tighten all hardware first. wrench tighten at the end of step 5C.
some components may be pre-assembled. nylon lock nuts will not fully
screw onto bolts, they must be wrench tighten to fully go on.
5a. route Cable (#16) and install 4 Pulleys (#17) on one side of the
machine as shown in step 5 using
3 - (#4) M10x50mm Hex Head Bolt
1 - (#3) M10x80mm Hex Head Bolt
8 - (#7) M10 Flat washer
4 - (#10) M10 nylon lock nut
1 - (#20) Metal spacer
5B. attach strap Handle (#19) to Cable (#16) using snap link (#18)
5C. repeat the previous steps (5a & 4B) on the other side of the machine.