Operating Instructions
WARNING: Before using this outdoor fire pit, please thoroughly read and follow all warnings and
instructions written in this manual. Failure to follow warnings and instructions may cause death,
serious injury, or property damage.
Note: During first use, leave fire pit ignited for 20 minutes as lava rocks may pop and cause
injury.
1. Push and turn control knob counterclockwise to low/ignite.
2. Press the ignitor button repeatedly to light burner.
a. If flames do not ignite after 45 seconds, turn off, wait 5 minutes, and try again.
b. If necessary, light burner with a match or lighter.
3. Adjust flames with the control knob. Flames should be between 2 and 10 inches high.
4. When finished, push and turn control knob clockwise to off position.
5. Turn valve on propane tank clockwise to turn off gas flow.
Cleaning
•
Immediately wipe spills; do not let spills absorb into surface.
•
Make sure fire pit is completely cool before cleaning.
•
Use a soft brush or cloth to wipe stains and dirt.
•
If necessary, clean with mild detergent and a soft cloth/sponge.
•
Thoroughly dry fire pit after cleaning.
•
Do not use petroleum-based or abrasive cleaners as it may damage the finish.
•
Do not use rough or harsh sponges/brushes.
Storage
•
Allow fire pit to cool 10 minutes before storage.
•
Disconnect propane tank when putting fire pit in storage. Do not store propane tank in
the vicinity of the fire pit.
•
Place cover on fire pit to protect from harsh weather.
•
Do not store in direct sunlight.
•
Do not store or use gasoline, or any other flammable vapors or liquids, in the vicinity of
the fire pit.
•
It is recommended that the fire pit is stored indoors during winter.
•
If fire pit is stored indoors, disconnect and leave propane tank outdoors.
•
For extended storage, remove the battery from the ignitor.
