13
Small Tilt Mount for Most TVs up to 50”
www.bestbuy.com/bestbuyessentials
3
Drill three pilot holes through the template to a depth of 2.4 in. (60 mm) using a
1/8 in. (3.5 mm) drill bit, then remove the template.
4
Place the magnetic level on the top of the wall plate, then align the wall plate with
the pilot holes, insert the lag bolts (
B1
) through the lag bolt washers (
B3
) and
through the holes in the wall plate. Make sure that the wall plate is level.
5
Tighten the lag bolts only until they are firm against the wall plate. Remove the
magnetic level.
2.4 in. (60 mm)
1/8 in. (3.5 mm)
Drill
Wood stud
