1. OSD timeout: Sets the time information messages about a channel will ap-
pear on screen, and that they appear every time the channel is changed.
2. OSD transparency: Configures the level of transparency of the OSD messages.
5.8 PVR Storage Information
This option will format the USB storage disk (Yellow button) with FAT or NTFS
formats. You can also select (Blue button) if you want to use the disk for recor-
ding function, Timeshift or Recording and Timeshift (REC & TMS).
5.9 PVR Setting
In this option you can enable or disable the availability of Timeshift function. You
can also change the time interval jumps (Jump) that are available pressing the FF
/ RR while playing a recording, enable the option to switch from Timeshift to re-
cording (you can use it pressing the REC button during a Timeshift), choice bet-
ween PS recording (MPEG2) or TS (record the entire signal) modes.
5.10 Other
This section contains the following options:
Auto Standby
The STB will be automatically switched into standby mode after three hours in
active mode following the last user interaction and/ or a channel change,an alert
message will show 2 minutes before going into standby mode.
RF Loop In Standby
This option allows you to turn on the output antenna RF Loop if you want to use
it for other devices.
LNB Power
Here you can enable or disable the power to the external antenna.
6. Tools
6.1 Information
When you enter the information menu, a screen will appear with information
about the unit, including the software version and date.
6.2 Load factory settings
Press [OK] to load defaults settings, Once the “Yes” option is chosen, the all re-
vised parameters of the receiver will be reset to the default alue. Please use this
function carefully.
E
N
G
L
IS
H
Easy Home DVB-T HD ViVA!
//
User Manual
23
