Step 11 Install Roof Gables
4.
Install the remaining gable on the back wall.
Siding Extends
Below Trim
2.
Install 1x3-72" boards along each side of the door opening, flush with the
bottom edge of the siding. Tack these boards with a couple nails; you may
want to move the trim later when you install the doors. Use 8d galv. nails.
3.
Locate a 1x3x71-3/4" board with angle cuts on both ends. Cut the board
length flush with the side door trim. Cut both ends, removing the angle cut,
this will make it easier to apply J-Channel around the door trim.
1.
Install the front gable, the gable with-out 1x4 boards attached, on the front wall.
Nail gable plate to the wall plate with 10d sinkers.
