24" x 48"
48" x 48"
2.
Install 1x4-6' fascia in the center of the building.
3.
Cut to fit and install a 1x4-4' fascia at the right end of the building.
1.
Starting at the front left of the building, install a 1x4-6' fascia board flush with the face of
the siding on the left gable. See Detail 'E'. Install the fascia so the bottom edge of the roof
sheathing will rest on the edge of the 1x4. Use a straight edge to align the 1x4 boards with
the top of the trusses. Install fascia with 6d galv. nails.
Step 17 Install 1x4 Fascia & Roof Sheathing
1x4 -6' Fascia Board
4.
Install roof sheathing per layout below. Sheathing should be flush with gable siding. Make
sure the trusses are plumb and the roof sheathing meet at the center of the truss. Use 6d common
nails spaced 12" apart. The top row of roof sheathing will be about 1" below the ridge to allow
for optional ventilation.
5.
Repeat on back of building to install fascia and roof sheathing.
36-1/2" x
48"
1x4 Fascia
2x4 Truss
Roof Sheathing
1" Below Top
Straight Edge
2x4 Tie Plate
2x4 Soffit Block
Nail Fascia to
2x4 Block
Detail 'E'
36-1/2" x
48"
36-1/2" x
48"
36-1/2" x
48"
24" x 48"
48" x 48"
48" x 48"
