3.
Install soffit panels on the
opposite side. Start with a
24" long panel that has a
'LAP' edge.
Step 14 Set Roof Trusses
Rear Gable
Set roof trusses. Secure trusses to metal
hangers with 1-1/2" hanger nails.
Step 15 Install Eave Soffit & Corner Trim
1.
Locate a 5" wide x 24" siding panel that has a 'tongue' edge. Install this panel under the truss
overhang at the rear of the building. Cut the length, the 'tongu'e edge should be flush with the
end of the truss. Install the siding/soffit panel with the beveled edge flush with the end of the
trusses and the cut edge against the gable siding. Use 6d galv. nails.
2.
Install (3) three more full length siding panel under the trusses. Cut the last panel to fit.
4.
Cut 75-3/4" long 1x4 trim boards
to length and install at the corners.
Soffit
Beveled Edge
