4.
Install a 67-1/2" door header between
the front wall frames on top of header
supports. Secure with 10d sinkers. Nail
through the top 2x4 plate and the wall
studs with 10d sinkers.
2.
Temporarily install (2) two 2x4-72" boards at both sides of the door opening to hold the wall
straight. These boards will be used later for tie plates.
3.
Install the remaining (2) two full width siding panels on the side walls.
Step 6
Set Walls
1.
Erect wall panels. IMPORTANT: Make sure walls are plum and square. Secure wall panels
together at the corners. Use (4) four 10d sinkers per corner. Nail wall panels to the floor. Nail
through the bottom plate. Use 10d sinkers or, if erecting on a concrete slab, concrete anchor bolts
(not included) spaced 24" apart.
2x4 Wall Brace
Full Width Siding
Full Width
Siding
67-1/2" Door
Header
