5.
Install a 8-1/2" long trim board, called a keystone,
at the top of the gable flush with the top of the
roof sheathing. Use 8d galv. nails.
2.
Install (2) two 82-1/2" long 1x4 trim boards
flush with the top of the roof sheathing.
Use 8d galv. nails.
3.
Repeat to install trim on other gable end.
1x4 Gable Trim
Step 22
Install Roof Sheathing, Gable and Door Drim
48" x 72"
48" x 72"
36-1/2" x 72"
48" x 51"
36-1/2" x 75"
36-1/2"x 48"
1.
Install roof sheathing per layout below. Make sure the trusses are plumb and the sheets meet
at the center of truss. Starting on lower front left corner install sheathing flush with gable
siding. Use 7d sinkers spaced 12" apart. The top row of roof sheathing will be about 1" below
the ridge to allow for ventilation.
2.
Repeat on back of building.
3.
Install a 35" long 1x3 board over the single door opening. Position this board 3/4" above opening
and centered.
4.
Install (2) two 1x3x73-1/4" boards along each side of the front door opening and butted too
the bottom edge of 35" trim. Tack these boards with a couple nails; you may want to move the
trim later when you install the doors.
