X
X
X
X
B
B
X
X
X
X
X
X
A
A
B
A
Do not discard any material until construction is complete. Including short blocks of 2x4s.
Step 1
Assemble 10' Long Side Walls
4.
Cut one of the 48" wide siding panels in half lengthways.
5.
Square wall frame. Measure diagonally (corner to corner). The measurements will be the same
when the wall is square. Select one of the 2' wide panels with the 'tongue' edge and install this
panel with the 'cut' edge flush with the end of the wall and extending 3/4" below the bottom
plate. Install using 6d galv. nails spaced 8" apart.
6
Install (2) two more siding panels.
Siding Extends 3/4" Below Plate
LAP Edge
1.
Position (2) two 2x4-48" boards and (2) two 2x4-72" boards together and indicate with 'X'
marks, where the wall studs will be located. Mark the ends that will butt together with 'the
letters A' an 'B'.
2.
Install 72" wall studs between the top and bottom plates. Nail both wall frames together.
3.
Repeat to assemble (3) three more 10' long side wall frames.
7.
Select another 10' wall frame and repeat to apply siding.
24"
23-1/4"
72" Wall Plate
48" Wall Plate
23-1/4"
Cut Edge
Tongue Edge
72" Wall Plate
48" Wall Plate
4' Wall Plate