2.
Cut (6) six 2x4-11" blocks from
another 8' long 2x4.
3.
Assemble the door header using
10d sinkers.
2x4-75" Board
12-3/4"
12-3/4"
Install (2) Two Blocks in Center
Do Not Nail This Edge
89-1/2" Wall Frame
92-1/2 Wall Panel
Step 8
Assemble Door Header
1.
Cut (2) two 2x4-8' boards to a length of 75".
3.
Butt wall frames together Do Not nail these frames together so they can be separated later.
4.
Install a siding panel but do not nail along the long edge that overlaps the other wall frame.
You can nail this edge after the wall panels are installed. This will enable you to separate the
wall panels making them easier to handle.
5.
Cut the last siding panel to a width of 45". The last panel will extend 3-1/2" past the frame.
Step 7
Assemble 89-1/2" Long Back Wall
X
X
X
X
X
X
24"
23-1/4"
89-1/2"
Wall Plates
24"
1.
Cut (2) two 2x4-8' to a length of
89-1/2". Position the boards together
and indicate with 'X' marks where
the wall studs will be located.
2.
Install pre-cut wall studs between the top & bottom plates.